Ülkemizde meydana gelen ve büyük yıkımlara yol açan depremlerden sonra inşa edilen
yapıların özellikle depreme karşı dayanıklı olmaları çok önem kazanmıştır. Yapıların
inşasında kullanılan yapı malzemelerinden en yaygın olanı betondur. Bundan dolayı da
özellikle betonarme karkas yapılarda betonarme taşıyıcı yapı elemanlarının inşasında
kullanılan betonarme betonun kalitesi çok önem kazanmıştır. Beton üretiminde kullanılan
maddelerin %65 ila %75’ini agrega olarak adlandırılan kum, çakıl ve kırmataş
oluşturmaktadır. Dolayısıyla nitelikli, istenilen basınç dayanımına sahip, çevresel etkilere
karşı dirençli (durabilitesi yüksek) beton üretebilmek, agreganın ‘TS 706 EN 12620-Beton
Agregaları’ standardında aranan özelliklere uygun olmasına bağlıdır.
Bu çalışmada, şehir merkezine yakın bir bölgede konumlanan Çanakkale Elmacık Köyü
mevkiinden standarda uygun olarak temin edilen kalker kayaçları ile bölgede faaliyet gösteren
ÜSAT Yapı Madencilik San. ve Tic. A.Ş.’ye ait kırma eleme tesisinde üretilen kırmataş beton
agregalarının mühendislik özellikleri boyut küçültme (kırma-eleme) numune azaltma ve
boyuta göre sınıflandırma işlemine tabi tutulduktan sonra (4 mm2
gözlü elekten geçen ince
agrega, 4 mm2
gözlü elekte kalan iri agrega olarak) sınıflandırılmıştır. Sınıflandırılan
numunelere ilgili Türk Standartları ve Avrupa Standartlarına (TS, EN) göre incelenerek beton
agregası olarak uygunluğu araştırılmıştır. Agrega numuneleri üzerinde tane büyüklüğü
dağılımı, parçalanma direnci tayini, tek eksenli basınç dayanımı, ince malzeme tayini, metilen
mavisi, tane yoğunluğu, su emme, gevşek yığın yoğunluğu, özgül ağırlık, kuruma çekmesi
deneyleri Çanakkale Onsekiz Mart Üniversitesi, Çevre ve Şehircilik Bakanlığı’ndan akredite
edilmiş olan Çanakkale Teknik Bilimler Meslek Yüksekokulu Yapı Malzemeleri
Laboratuvarı’nda gerçekleştirilmiştir.
Çanakkale Elmacık Köyü mevkiinden alınan numunelerin yapılan analizler sonucunda TS
706 EN 12620; Beton Agregaları standardında aranan özelliklere uygun olduğu ve
kırmataşların hazır beton üretiminde beton agregası olarak kullanılabileceği tespit edilmiştir.
It has become very important for the constructions which have been built after the
earthquakes that have led to great destructions in our country to be particularly resistant to
earthquakes. One of the most common building materials used in the constructions of
buildings is concrete. Therefore, the quality of the concrete has gained attention.. 65-75% of
the materials used in concrete production are composed of sand, gravel and crushed stone
called aggregate. Therefore, being able to produce concrete with high quality, durability and
environmental resistance depends on the properties and the quality of aggregate according to
TS 706 EN 12620-Concrete Aggregates standards.
In this study, after the limestone rocks obtained in accordance with the standards in Çanakkale
Elmacık Village located near the city center and the engineering properties of the crushed
stone concrete aggregates produced in the crushing screening plant of the USAT Building
Mining Industry and Trading Inc which operates in the region are subjected to the
classification process according to the size downscaling (crushing-elimination), sampling
reduction and size, they are classified (as fine aggregate passing through a 4 mm square- mesh
screen and coarse aggregate remaining in 4 mm square- mesh screen). Classified samples
have been examined according to Turkish Standards and European Standards (TS, EN) and
their suitability has been studied as a concrete aggregate. The experiments of the particle size
distribution on aggregate samples, the fracture resistance determination, the uniaxial
compressive strength, the fine material determination, the methylene blue, the grain density,
the water absorption, the loose bulk density, the specific gravity and the desiccation shrinkage
tests have been carried out in the Laboratory of Construction Materials of Çanakkale Onsekiz
Mart University, Vocational School of Technical Sciences, which was accredited by the
Ministry of Environment and Urban Planning.
The fact that samples taken from Çanakkale Elmacık Village site are suitable to meet the
requirements in the Concrete Aggregates standard of TS 706 EN 12620 as a result of the
analyses realized and the crushed stone can be used as a concrete aggregate in the production
of ready mixed concrete has been determined.